Spring in Eagle Mountain signals the start of lawn-growing season—and that means it’s time to turn your sprinkler system back on. But hold up: firing up your irrigation too quickly or carelessly can result in broken pipes, water waste, or uneven coverage that leaves your lawn struggling just when it should be thriving.
In this blog, we’ll cover the most common sprinkler startup mistakes and how to avoid them. A little attention now can save time, money, and frustration all season long.
Why Smart Sprinkler Startup Matters in Eagle Mountain
In Utah’s high desert climate, a properly functioning sprinkler system isn’t a luxury—it’s a necessity. However, winter weather can cause underground damage that often goes unnoticed until it’s too late. Starting your system without a careful inspection can lead to:
- Leaks and flooding
- Uneven water distribution
- Wasted water and higher bills
- Dead spots or dry patches
That’s why professional sprinkler startup is part of our comprehensive spring landscaping service at Saratoga Mowing.
Top Sprinkler Startup Mistakes (And How to Avoid Them)
1. Turning the Water On Too Quickly
Sudden pressure can crack pipes or burst fittings. Always open the main valve slowly and in stages, allowing the system to pressurize gradually.
2. Skipping a Visual Inspection
Before starting the system, walk your property and inspect heads, valves, and controllers. Look for cracked components or debris that may block spray patterns.
3. Ignoring the Backflow Preventer
The backflow preventer protects your water supply from contamination. If not properly reassembled or tested, it could cause water quality issues—or trigger a fine.
4. Failing to Adjust Zones
Spring weather and new lawn growth can change how water is absorbed. Update your timer settings and zone durations to match seasonal needs.
5. Not Testing Each Zone Individually
Don’t assume everything’s working because one area looks fine. Activate and observe each zone separately to catch leaks or misaligned heads.
Bonus Tips for a Flawless Startup
- Check the controller battery and reset schedules.
- Clean or replace clogged nozzles.
- Note any soggy or dry areas that indicate imbalance.
- Schedule your first deep watering early in the morning to avoid evaporation.
If you’re unsure where to start—or just want it done right—our team at Saratoga Mowing can handle your sprinkler startup from top to bottom.
Frequently Asked Questions (FAQs)
Q: When should I turn on my sprinklers in Eagle Mountain?
A: Mid to late April is usually safe, depending on ground temperature and weather forecasts.
Q: What if I see water bubbling or pooling?
A: Shut off the system and call for help. It could be a sign of a cracked pipe or misaligned head.
Q: Do I need to adjust sprinkler timing in spring?
A: Yes. Spring lawns need less frequent watering than summer, so start conservatively and increase as temps rise.
Q: Is sprinkler startup part of your spring services?
A: Yes! We include full inspections and reactivation in our spring landscaping packages.
Protect Your Lawn with Professional Sprinkler Startup from Saratoga Mowing
Starting your sprinkler system right sets the tone for a lush, healthy lawn. Avoid costly repairs and wasted water by letting Saratoga Mowing handle your sprinkler startup in Eagle Mountain.
Book your professional sprinkler startup with Saratoga Mowing today →
